The adjustment of the cam divider is an important factor affecting the dividing accuracy and life. The divider is precisely processed and carefully assembled before leaving the factory. Improper adjustment will affect its dividing accuracy, cause impact and noise problems, and may reduce its speed and bearing capacity, shortening its life.

When adjusting the cam divider, you must first pay attention to the adjustment of the axis spacing. Long-term use and wear may cause gaps in the positioning work area, which can be eliminated by synchronously adjusting the eccentric sleeves at both ends of the input shaft.

Secondly, the input and output axial positions of the divider can be adjusted by adjusting the locking nuts on both sides of the cam or the bearing glands on both sides of the input shaft. Similarly, the axial position of the splitter wheel can be adjusted by adjusting the bearing glands at both ends of the output shaft or the locking nuts at the rear end.

It is important to note that the splitter is carefully adjusted at the factory and should not be adjusted by the user to avoid misoperation. If adjustment is necessary, the factory should be contacted.

In addition, keeping the divider clean is also one of the key steps in adjustment. Clean the surface and interior of the divider regularly to avoid the accumulation of dust, oil stains or other impurities. These contaminants may interfere with the normal operation of the divider and affect the segmentation accuracy and life. Be sure to use appropriate cleaning agents and tools for cleaning, and ensure thorough drying to prevent moisture from entering the divider and causing corrosion.

Finally, regular inspection and maintenance of the relevant parts of the divider are also important measures to maintain its normal operation. Check whether the cam, bearings, transmission chain, connecting bolts, etc. are worn or loose, and replace or tighten them in time if necessary. According to the actual application, debug and optimize the speed, force and other parameters of the divider to obtain the best segmentation effect and stability.

Through the above adjustment and maintenance measures, you can keep the cam divider in good working condition, improve the segmentation accuracy and life, ensure its normal operation, and reduce the risk of failure and damage. This helps to improve production efficiency and product quality while reducing maintenance costs and downtime.