What should I do if the cam divider does not rotate after the motor is powered on? The divider cannot rotate after the motor is powered on. The customer thinks there may be something wrong with the divider and needs technical support.

Friends often ask how to position the cam divider? How to judge whether the divider is in place?
The input shaft of the cam divider has two ends, one of which is connected to the motor reducer, and the other end is fixed with an induction cam, and the proximity switch is used to judge the position, as shown in the video below:

How to choose a cam divider? The cambered type, our common DF DT DA DS DFH DFS DE, etc. all belong to the cambered series;
flat type, also called parallel conjugate type, is a rectangular block in appearance, mainly with shaft output, and is mostly used in the die-cutting machine industry and application scenarios that require chain drive;

The cam divider is filled with lubricating oil when it leaves the factory, and the oil level is preferably in the middle of the oil mark. After a long time, the divider needs to replace the internal lubricating oil. Timely and appropriate replacement of the lubricating oil can make the divider work better and extend its service life.

Precautions for using cam dividers - replace the vent cap and use the divider properly. A divider can be used for three to five years, and some customers can use it for ten years. However, unreasonable use can cause great damage to the divider. Common problems include oil leakage, clearance, inaccurate positioning, etc.